How to Troubleshoot If Your Hot Tub is Tripping the Breaker

A hot tub provides excellent relaxation and therapeutic benefits, but in the rare situation that your circuit breaker is tripping, it’s important to understand what steps can be taken to resolve it. Here are five easy fixes you can apply when your hot tub is tripping your circuit breaker:

1. Get Rid of Any Moisture in the Breaker Box

Without a doubt, water is an essential part of the hot tub experience. However, when it comes to the electrical components of a hot tub, water should be nowhere present. For safety reasons, your breaker box has the protective function of automatically turning off whenever there’s moisture, even in the slightest bit.

Once you’ve suspected that moisture might be the culprit, an easy fix would be to get rid of it. First, turn off the main electrical supply. Then, open the breaker box and carefully check for signs of water. If you find any, use a towel or any absorbent cloth to wipe it off, then use a fan near the outlet to make sure it’s completely dry. After that, you can go ahead and reset the breaker.

Of course, it’s better if you prevent any moisture from getting into the panel in the first place. You can do this by keeping the rubber seal intact and the cables sealed tight. If you’re sure that the breaker is dry, but flipping still occurs, there might be a need to replace the receptacle.

2. Replace Your Old GFCI Breaker

Tripping can also happen if your ground fault circuit interrupter (GFCI) is no longer in good condition. Even though they are designed to last long and withstand continued use, they can still get worn out eventually. If this is the case, you might need to get a new breaker.

To find out if a replacement is in order, you can try a quick test. Start with switching on the hot tub circuit breaker. If it suddenly trips again, remove any remaining connections from the breaker. Next, try flipping the GFCI breaker back on. If it trips again, you can confirm that the breaker itself is the issue. If there’s no tripping, then something else is causing the problem.

3. Secure All Wiring Connectors

When there are circuit interruptions that cause tripping, one of the issues you might want to check is the presence of any loose wiring. Wiring connectors can come loose due to old age or any motion caused by external factors. Unsecured wires typically result in power fluctuations, which can then cause your hot tub’s breaker to trip.

In this scenario, the best thing to do is to get in touch with a licensed electrician to inspect your hot tub’s wiring system. As for plastic plug-in connectors that you might have on your hot tub, an easy fix would be to push them securely back into place.

4. Switch Out Your Hot Tub’s Heater

If your hot tub’s heater shows any sign of corrosion or damage, then getting a new one might be the solution. A heater that’s not in the best shape can also cause the circuit breaker to trip.

Take a look at the heating component and find out what kind of damage it might have. Do you see any rust, white powder, or other signs of corrosion? If there’s no visible sign of any deterioration, you can try running a quick test. Simply disconnect the heater from the control box and switch on the breaker. You can be sure that the heater was the issue if the breaker remains switched on. If that’s the case, you can fix the tripping problem with a replacement.

5. Take Measures to Prevent Short Circuits

Because breakers are designed to trip for safety reasons, your hot tub is bound to trip the breaker in the event of a short circuit. Short circuits can easily be avoided by checking if all the connections in your hot tub are secure and ensuring that no moisture has seeped into the breaker box. You can test if there’s an unsecured connection by unplugging all the wires then connecting them back one at a time to find out if any of them aren’t properly working. You can also prevent short circuits by making sure that all the electrical components in your hot tub are completely dry.

Now that you know the possible reasons why your hot tub could be tripping the circuit breaker, you can do a little troubleshooting and test out these easy fixes. Don’t let a small electrical problem ruin your hot tub experience – try these tips and get back to relaxing in no time!

For more questions about your spa, you can contact a hot tub dealer near you for further guidance. To learn more about choosing which hot tub is perfect for your home, download our free buyer’s guide.

FREE HOT TUB BUYERS GUIDE

To learn how to select the perfect hot tub, download your free buyer’s guide now by clicking below!


Hot Tub Guide

Leave a Reply

Your email address will not be published. Required fields are marked *